BRINKMANN PUMPS Bplogic, Operating Manual, Page: 256 / 291

7 Performing maintenance
256 bplogic intelligent pump controller 18/02/2021
5. After backing up is complete, eject the storage device and remove it.
6. Keep the system backup safe.
Restoring
Materials:

USB storage medium with current system backup
7. Use the version info (Fig. 176/1) to check whether a current version is installed.
8. In
“Restore system“
(Fig. 176/4), tap
“Start”
to restore the software.
9. After restoring is complete, eject the source storage device and remove it.
10. Closing the service access:

Section 5.6.4
“
Setting WLAN module parame-
ters
”
on page 204, handling step 4 and handling step 5.
11. Restarting the system:

Section 5.6.2.7
“Device restart”
on page 200.
7.2.4 Backing up and updating settings
The following steps describe how you can back up and update all setting parame-
ters.
Backing up setting parameters can take up to 5 minutes.
Prerequisite:

Section 7.2.1
“Backup and restore
preparation
”
on page 249 has been com-
pleted.
1. In
“Configuration – System – Backup & Restore”
, tap
“Settings”
.
 “Configuration – System – Backup & restore – Settings”
(Fig. 179) opens.