BRINKMANN PUMPS Bplogic, Operating Manual, Page: 102 / 291

5 Operating the pump controller
102 bplogic intelligent pump controller 18/02/2021
Ap
p
lica
ti
o
n
-si
n
g
le
-vi
e
w
_
F
re
q
u
e
n
cy
-a
d
ju
st
me
n
t-
mo
d
e
-0
1
.p
n
g
Fig. 53: Specifying the pump speed
1 Manual/automatic mode
2 Application on/off
3 Enter target speed value
4 Display actual speed value
5 Resulting throughput
6 Resulting pressure
3. In the
“Application overview”
, tap the required application module with the
“
Ad-
justment mode
”
primary function (

section 5.7.3
“
Using the application over-
view during operation
”
on page 226 ).

The application single view opens ( Fig. 53 ).
4. Ensure that the pump is in manual mode (Fig. 53/1).
5. Ensure that the pump is switched on (Fig. 53/2).
6. Enter the changed speed (Fig. 53/3).
7. Read the resulting process parameters (Fig. 53/5 + 6).
8. If the required process parameters are not reached, re-adjust the target speed.
9. Once adjustment is complete, exit manual mode (Fig. 52/2, Fig. 53/1).