BRINKMANN PUMPS Bplogic, Operating Manual, Page: 231 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 231

Section 5.4.1
“
Executing adjustment mode with one pump
” on
page 100 provides an example for using this function.
5.7.5 Using the application oscilloscope during operation
You can use the application oscilloscope to assign a process size or a parameter
value to a channel that displays the development of the process size or the parame-
ter value graphically.
A channel can be filled with parameters and process sizes from the submenus for
I/O configuration, the application modules, and the pumps. For information on the
corresponding available parameters and process sizes, also see:

I/O configuration:

Section 5.6.1
“Setting I/O parameters”
on page 167

Application modules:

Section 5.3
“Application modules”
on page 91

Pumps:

Section 5.6.1.5
“Setting pump parameters”
on page 182
The pump controller can display the development of the parameter values or proc-
ess sizes on two screens:

The display on the main menu level takes up half of the screen width and can
display up to 8 channels simultaneously.

The display on the submenu level takes up the entire screen width and can
display up to 16 channels simultaneously.
1. Tap in the navigation bar.
 “Application oscilloscope”
(Fig. 155) opens.
Fig. 155 indicates an application oscilloscope that is still to be
configured.