5 Operating the pump controller
18/02/2021
bplogic intelligent pump controller
203
C
o
n
fi
g
u
ra
ti
o
n
_
Et
h
e
rn
e
t1
.p
n
g
Fig. 127:
“Configuration – Network – Ethernet 1 (M12)/Ethernet 2 (RJ45)”
Fig. 127 and the configuration options are identical for Ethernet 1
and 2.
4.
Select the required options depending on the server used:
If you use a DHCP server:
Tap
“
Obtain IP address automatically
”
.
The IP address assigned by the DHCP server is displayed in the IP ad-
dress field.
Tap
“
Obtain DNS server address automatically
”
.
If you are not using a DHCP server:
Tap
“
Use the following IP address
”
and enter the IP address.
Tap
“
Use the following DNS server addresses
”
and enter the DNS
server addresses.
5.
Press
“Save”
to confirm the selection.