BRINKMANN PUMPS Bplogic, Operating Manual, Page: 181 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 181
C
o
n
fi
g
u
ra
ti
o
n
_
I/
O
_
fre
q
u
e
n
cy
-co
n
ve
rt
e
r1
.p
n
g
Fig. 106:
“Configuration – I/O configuration – Frequency converter 1”
2. In the
“General”
(Fig. 106/1) submenu, check the settings defined by the manu-
facturer.
3. In the
“
Frequency converter 1
”
menu, either tap
“
Digital inputs
”
,
“
Digital out-
puts
”
,
“
Analog inputs
”
or
“
Analog outputs
”
(Fig. 106/2) as required, e.g.
“
Digital
inputs
”
.
 “Configuration – I/O configuration – Frequency converter 1 – Digital inputs”
is displayed.
4. In
“Configuration – I/O configuration – Frequency converter 1 – Digital inputs”,
select the required digital input, e.g.
“
Digital input 1
”
.

The
“Digital input 1”
menu is displayed.
5. Make the required settings or check them

Section 5.6.1.1
“
Setting parameters
for digital inputs and outputs
”
on page 169 or section 5.6.1.2
“
Setting parame-
ters for analog inputs and outputs
”
on page 172.
Analog inputs
Analog outputs