BRINKMANN PUMPS Bplogic, Operating Manual, Page: 261 / 291

7 Performing maintenance
18/02/2021 bplogic intelligent pump controller 261
pearance of the buttons depends on whether the event message that is displayed
must be acknowledged.
You can use the
“Event list”
menu to call and view closed event messages even if
the cause of the event message has already been rectified (

7.3.3
“ “Event list”
menu
”
on page 262 ).
Closing the event message
An event message that does not have to be acknowledged only receives the
“OK”
button.
You can close the event message in two ways:

Close the event message by:

Tapping the
“OK”
button.
 The event message is closed and marked as “active” in the “Event list”
menu.

Rectify the cause of the event message

The
event message is closed and marked as “inactive” in the “Event list”
menu.
Acknowledging the event message
An event message that must be acknowledged receives the two buttons
“Ig-
nore”
and
“Acknowledge”
.
You can close the event message in two ways:

Close the event message by:

Tapping the
“Ignore”
button.
 The event message is closed and marked as “active” in the “Event list”
menu.

Tapping the
“Acknowledge”
button.

The event message is closed.

Depending on whether the cause of the event message has been rectified,
the event message is either marked as “active” or “inactive” in the “Event
list”
menu.