5 Operating the pump controller
18/02/2021
bplogic intelligent pump controller
169
5.6.1.1
Setting parameters for digital inputs and out-
puts
A designation and a name for the connection point can be assigned to each digital
input and digital output. Furthermore, you can define whether the pump controller
inverts the signal of the sensor that is connected.
In addition, you can define whether you want to use each digital output of I/O mod-
ule 1 as an output or an input.
All other settings for the digital inputs and outputs are specified by the manufacturer
and must be checked before commissioning.
1.
In
“Configuration”,
tap
“I/O configuration”
.
“Configuration – I/O configuration”
(Fig. 96) opens.
2.
In
“I/O configuration”,
tap the required I/O module or the required frequency
converter, e.g.
“
I/O module 1
”
.
“Configuration – I/O configuration – I/O module 1”
(Fig. 98) opens.
C
o
n
fi
g
u
ra
ti
o
n
-mo
d
u
le
1
.p
n
g
Fig. 98:
“I/O module 1”
3.
Either tap
“
Digital inputs
”
or
“
Digital outputs
”
.
“Digital inputs”
or
“Digital outputs”
opens (Fig. 99). A list of the available
digital inputs or digital outputs is displayed.
Analog inputs
Analog outputs