BRINKMANN PUMPS Bplogic, Operating Manual, Page: 207 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 207
5.6.5 Checking field bus parameters
The pump controller is equipped with pre-configured, modified field buses. These
field buses are used for communication between the pump controller and further
system components such as the controller on a machine tool.
5.6.5.1 Displaying the field bus type
The field bus type that is available on your pump controller depends on your con-
figuration. The field bus on your pump controller is pre-configured by the manufac-
turer according to your configuration. Only the manufacturer can set the field bus
type that is available on your pump controller.
You can use the pump controller to display the field bus that is available.

The settings are pre-configured by the manufacturer.

Check that the settings are correct before commissioning for
the first time.

If there are problems with the configuration, contact customer
service:

When doing so, provide the current configuration file

Section 7.2.1
“Backup and restore
preparation
”
on
page 249 .
Or:

Have the pump controller’s order number and serial
number at hand.
 “Customer service”
on page 8
1. In
“Configuration”
, tap
“Field bus”
.
 “Configuration – Field bus”
(Fig. 132) opens.