BRINKMANN PUMPS Bplogic, Operating Manual, Page: 103 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 103
5.4.2 Executing control mode with one pump
In control mode, process parameters are aligned continuously to an adjustable
target value. Therefore, the pump controller continuously
adjusts the pump’s speed.
Prerequisites:
The corresponding application module is set up and selected:


Section 5.3.1
“Checking the assignments to application modules”
on
page 92


Section 5.7.3
“Using the application overview during operation”
on
page 226
1. In the
“Application overview”
(

section 5.7.3
“
Using the application overview
during operation
”
on page 226 ), tap the required application module.
Ap
p
lica
ti
o
n
o
ve
rv
ie
w
_
p
re
ssu
re
re
g
u
la
ti
o
n
-0
1
.p
n
g
Fig. 54: Regulating the process value
2. Switch the application module into manual mode (Fig. 54/1).
3. Enter the target value for the required process size, e.g. the required pressure
in bar if the pressure is to be regulated (Fig. 54/2).