5 Operating the pump controller
70
bplogic intelligent pump controller
18/02/2021
5.2.7 Navigation
You can operate the pump controller both via the pump controller’s touchscreen
and from a tablet or PC.
5.2.7.1
Buttons
You can use buttons to navigate within the pump controller’s menus. All buttons that
are used for navigation are active at all times. This means that you can always tap
this button to call a different menu or to return to the previous view.
Software switch
The pump controller also has some special buttons, the software switches.
All software switches have two states, e.g. “On” and “Off” (Fig. 28). They are
used to activate and deactivate functions and application modules, as well as to
switch the application modules from automatic mode to manual mode.
Sw
it
ch
st
a
te
s_
e
xa
mp
le
-0
1
.p
n
g
Fig. 28
: Example: the two states of an “On/Off” software switch
Tap a switch in order to change its state.
Inactive buttons
Inactive buttons cannot be tapped. Inactive buttons are greyed out (Fig. 29/1).
Bu
tt
o
n
_
a
ct
ive
_
in
a
ct
ive
-0
1
.PN
G
Fig. 29: Example: inactive buttons and active buttons