5 Operating the pump controller
18/02/2021
bplogic intelligent pump controller
153
As soon as an application module with the “Logic module” primary
function is activated, the pump controller checks the actions for
which parameters were set automatically. If an error in the pa-
rameter settings is detected, the application module is automati-
cally deactivated and an error message issued.
1.
In the
“Application overview”
(
section
Using the application overview
on page
), tap the application module with the
“
Logic
module
”
primary function.
The application single view for the logic module (Fig. 86) opens.