BRINKMANN PUMPS Bplogic, Operating Manual, Page: 189 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 189

The remaining settings are pre-configured by the manufac-
turer.

Check that the settings are correct before commissioning for
the first time.

If there are problems with the configuration, contact customer
service:

When doing so, provide the current configuration file

Section 7.2.1
“Backup and restore
preparation
”
on
page 249.
Or:

Have the pump controller’s order number and serial
number at hand.
 “Customer service”
on page 8
5.6.2 System settings
Open
“Configuration – System”
1. Tap in the navigation bar.

The
“Configuration”
(Fig. 113) menu opens.
C
o
n
fi
g
u
ra
ti
o
n
_
me
n
u
-0
1
.p
n
g
Fig. 113:
“Configuration”