BRINKMANN PUMPS Bplogic, Operating Manual, Page: 101 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 101
Changing settings
Ap
p
lica
ti
o
n
o
ve
rvi
e
w
-01
.p
n
g
Fig. 52:
“Application overview”
1 Automatic mode
2 Manual mode
2. In the
“Application overview”
(

section 5.7.3
“
Using the application overview
during operation
”
on page 226 ), switch the required application module from
automatic mode ( Fig. 52 /1) to manual mode ( Fig. 52 /2).
Or:
Switch the application module into manual mode in the application single view
(Fig. 53).

As long as an application module is working in manual mode, the applica-
tion module does not send an operational readiness signal to the higher-
level controller.