5 Operating the pump controller
18/02/2021
bplogic intelligent pump controller
187
Motor
All parameters for the pump’s motor are pre-set by the manufac-
turer and cannot be changed. The overview in the “Motor” sub-
menu is only for information and to check the parameters.
However, you must still use the frequency converter to set pa-
rameters for the motor.
1.
In
“Configuration – Pumps – Pump 1”,
tap
“Motor”
.
“Configuration – Pumps – Pump 1 – Motor”
(Fig. 111) opens.
C
o
n
fi
g
u
ra
ti
o
n
_
Pu
mp
_
Mo
to
r_
a
.p
n
g
C
o
n
fi
g
u
ra
ti
o
n
_
Pu
mp
_
Mo
to
r_
b
.p
n
g
Fig. 111:
“Configuration – Pumps – Pump 1 – Motor”
2.
Check that the settings are correct before commissioning for the first time.