BRINKMANN PUMPS Bplogic, Operating Manual, Page: 99 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 99
5.3.3 Switching the application module into manual mode
Each application module can be switched from automatic mode into manual mode.
Manual mode is used to set up and test functions, and for troubleshooting. The
effects of changed parameter values can be tested in manual mode.

Ap
p
lica
ti
o
n
o
ve
rvi
e
w
-0
1
.p
n
g
Fig. 51:
“Application overview”
1 Automatic mode
2 Manual mode
1. In the
“Application overview”
(

section 5.7.3
“
Using the application overview
during operation
”
on page 226 ), switch the required application module from
automatic mode ( Fig. 51 /1) to manual mode ( Fig. 51 /2).

As long as manual mode is activated for an application module, the higher-
level controller does not receive a notification that it is ready for operation.
2. In manual mode, check the effects of changed pump settings on the complete
installation’s operation.

Section 5.4.1
“
Executing adjustment mode with one pump
”
on
page 100 provides an example for using this function.