BRINKMANN PUMPS Bplogic, Operating Manual, Page: 222 / 291

5 Operating the pump controller
222 bplogic intelligent pump controller 18/02/2021
And/or:
Insert the micro SD card into the micro SD slot (Fig. 145/3).
Note the following:

The USB storage medium may protrude by a maximum of 1.5 cm so that
the service access can be closed.

Use a micro SD memory card with a maximum capacity of 32 GB.
2. Closing the service access:

Section 5.6.4
“
Setting WLAN module parame-
ters
”
on page 204, handling step 4 and handling step 5.
Open the directory path for the storage medium.
A local directory is set up on the pump controller, which you can use to access all
connected storage media.
1. Use the file manager to navigate to the following directory path:
/home/bplogic/media

One directory is displayed for each connected storage medium.
2. Tap the directory for the storage medium that you wish to access.
For further use:


Section 6.1
“Using logging”
on page 239


Section 7.2.3
“Backing up and updating the system
software
”
on page 253


Section 7.2.2
“Backing up and updating application
modules
”
on page 250


Section 7.2.4
“Backing up and updating settings”
on
page 256
