BRINKMANN PUMPS Bplogic, Operating Manual, Page: 239 / 291

6 Additional functions
18/02/2021 bplogic intelligent pump controller 239
1. Tap in the navigation bar.

The
“Configuration”
( Fig. 161 ) view opens.
2. Navigate as follows depending on the required settings:


Section 6.1
“
Using logging
”
on page 239: Fig. 161 /1


Section 6.2
“
WLAN
”
on page 243: Fig. 161 /2


Section 6.3
“
Automatic time setting
”
on page 245: Fig. 161 /2
6.1 Using logging
The long-term logging function can be used to record several process sizes or pa-
rameters simultaneously.
The channel can be filled with parameter values and process sizes from the sub-
menus for I/O configuration, the application modules, and the pumps.
For information on the corresponding available parameter values and process
sizes, also see:

I/O configuration:

Section 5.6.1
“
Setting I/O parameters
”
on page 167

Application modules:

Section 5.3
“
Application modules
”
on page 91

Pumps:

Section 5.6.1.5
“
Setting pump parameters
”
on page 182
Also note the following when working with files:


Section 5.2.10
“
File manager
”
on page 81

 “
File operations
”
on page 199


Section 7.2.1
“
Backup and restore preparation
”
on
page 249
1. In
“Configuration”
, tap
“System”
.
 “Configuration – System”
opens.
2. In
“Configuration – System”
, tap
“Logging”
.
 “Configuration – System – Logging”
opens.