BRINKMANN PUMPS Bplogic Operating Manual Download Page 12

Page: 12 / 291

2 Safety

bplogic intelligent pump controller

18/02/2021

2 Safety

2.1 Symbols in this operating manual

Safety instructions

Safety instructions in this manual are marked by symbols. The safety instruc-
tions are introduced by signal words that express the degree of danger.

DANGER!

This combination of symbol and signal word advises of an im-
mediately dangerous situation that causes death or serious
injuries if not avoided.

WARNING!

This combination of symbol and signal word advises of a possi-
bly dangerous situation that may cause death or serious injuries
if not avoided.

CAUTION!

This combination of symbol and signal word advises of a possi-
bly dangerous situation that may cause moderate or minor inju-
ries if not avoided.

NOTICE!

This combination of symbol and signal word advises of a possibly
dangerous situation that may cause damage to property if not
avoided.

Summary of Contents for Bplogic




































































































































































































































































































Search results

Summary of Contents for Bplogic

Reviews:

BRINKMANN PUMPS Bplogic, Operating Manual, Page: 12 / 291

Search results

Summary of Contents for Bplogic

Reviews: