BRINKMANN PUMPS Bplogic, Operating Manual, Page: 262 / 291

7 Performing maintenance
262 bplogic intelligent pump controller 18/02/2021
7.3.3
“Event list” menu
All event messages are saved in the
“Event list”
menu even if the cause of the
event message has already been rectified. This way, you can track which faults
have occurred on the pump controller, even after rectifying the error.
Eve
n
t-
list
_
O
ve
rvi
e
w
-0
1
.p
n
g
Fig. 182
: “Event list”
1 Read event message. 3 Active event message.
2 Unread event message. 4 Inactive event message.
5 List of all saved event mes-
sages in chronological order.
All event messages are
marked as “unread” in bold (
Fig. 182 /2) until they are
opened using the
“Event list”
menu (

section 7.3.3.2
“
Displaying event messages
”
on page 265 ).
Active event messages are marked with coloured icons in the
“Event list”
menu
(Fig. 182/3). The icons for inactive event messages are greyed out (Fig. 182/4).
The conditions
under which an event message is marked as “active” depend on
whether it must be acknowledged:

An event message that does not have to be acknowledged is displayed as
active until the cause is rectified.