BRINKMANN PUMPS Bplogic, Operating Manual, Page: 137 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 137
All user groups can view the logic module’s parameters and its actions, and check
that they are correct.
Only the following user groups can set parameters for the logic module and its ac-
tions:

Service

Admin

Check that the parameters set for the logic module are cor-
rect before commissioning for the first time.

If there are problems with the configuration, contact customer
service:

When doing so, provide the current configuration file

Section 7.2.1
“Backup and restore
preparation
” on
page 249 .
Or:

Have the pump controller’s order number and serial
number to hand.
 “Customer service”
on page 8
1. Tap in the navigation bar.

The
“Configuration”
menu opens.
2. In the
“Configuration” menu, tap “Applications”
.
 “Configuration – Applications”
opens.
3. In
“Applications”, tap “Primary functions”
.

The
“Configuration – Applications – Primary functions”
(Fig. 76) view
opens.

C
o
n
fi
g
_
Ap
p
lica
ti
o
n
_
L
o
g
ic
-mo
d
u
le
.p
n
g
Fig. 76:
“
Primary functions
”
4. Tap the required logic module, e.g.
“Logic module 4”
(Fig. 76/1)