Asus DS300f User Manual Download Page 258

Page: 258 / 449

239

Chapter 6: Management with the CLU

Managing Logical Drives

Logical drive management includes:
•

Viewing Logical Drive Information (page 239)

•

Making Logical Drive Settings (page 239)

•

Initializing a Logical Drive (page 240)

•

Running Redundancy Check (page 240)

•

Locating a Logical Drive (page 241)

•

Creating a LUN Clone (page 242)

To create or delete a logical drive

, see ―Managing Disk Arrays‖ on page 225.

Viewing Logical Drive Information

To view logical drive information:

1. From the Main Menu, highlight

Logical Drive Management

and press Enter.

2. Highlight the logical drive you want and press Enter.

The information and settings screen appears.

3. Highlight any of the following and press Enter to view more information:

•

Check Table

– Read Check, Write Check, and Inconsistency Check

Tables

•

Logical Drive Statistics

Making Logical Drive Settings

1. From the Main Menu, highlight

Logical Drive Management

and press Enter.

2. Highlight the logical drive you want and press Enter.

3. For the following items, accept the existing setting choose a new one:

•

Highlight

Alias

and type an alias into the field.

Maximum of 31 characters. Use letters, numbers, space between words
and underscore. An alias is optional.

•

Highlight

WritePolicy

and press the spacebar to toggle between

WriteBack

and

WriteThru

(write though).

•

Highlight

ReadPolicy

and press the spacebar to toggle though

ReadCache

ReadAhead

and

None

4. Press Ctrl-A to save your settings.

Summary of Contents for DS300f


































































































































































































































































































































































































































































Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands

Asus DS300f, User Manual

Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands