Asus DS300f, User Manual

Page: 110 / 449

91
Chapter 4: Management with ASUS Storage Management
5. Enter a value in the field for each of the following items:
•
Node Name
– An iSCSI node is identified by its name.
•
Node Alias
– Optional. Maximum of 31 characters. Use letters,
numbers, space between words and underscore.
•
Max Burst Length
– Maximum length of a solicited data sequence
(512 b to 16 Mb).
•
Default Time to Wait
– After a dropped connection, the number of
seconds to wait before attempting to reconnect.
•
Default Time to Retain
– Number of seconds after time to wait (above)
before reassigning outstanding commands.
6. Check the corresponding box to enable the following features:
•
Enable Header Digest
– Enables use of Header Digest (CRC). See
note below.
•
Enable Data Digest
– Enables use of a Data Digest (CRC). See note
below.
•
Enable Uni-directional CHAP Authentication
– Enables Challenge
Handshake Authentication Protocol
•
Enable Bi-directional CHAP Authentication
7. Click the Submit button.
Notes
•
Header Digest and Data Digest work best with initiators
equipped with a TCP Offload Engine (TOE). Refer to your
iSCSI HBA user manual for more information.
•
For iSCSI network settings on the Data Port
s, see ―Making
iSCSI Port Settings‖ on page 81.
• For CHAPs, see ―Working with iSCSI CHAPs‖ on page 94.
Viewing iSCSI Target Ports
You can see the target port settings, but none of these values are user-adjustable
in the current version of the software.
To view the iSCSI target port settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the iSCSI Management icon.
4. Click the Target Ports tab in Management View.