Asus DS300f User Manual Download Page 231

Page: 231 / 449

212

Chapter 6: Management with the CLU

•

Highlight

Week

and press the spacebar to toggle through First, Second,

Third, Forth, and Last.

•

Highlight

Day

and press the spacebar to toggle though the days of the

week.

9. Press Ctrl-A to save your settings.

10. Press Y to confirm.

Synchronizing the Subsystem NTP Manually

The NTP service must be enabled before you can manually synchronize the
subsystem. See ―Setting Subsystem NTP‖ on page 211.

To synchronize the ASUS Storage subsystem with an NTP Server:

1. From the Main Menu, highlight

Subsystem Management

and press Enter.

2. Highlight

NTP Management

and press Enter.

3. Highlight

Start Time Sync

and press Enter.

4. Press Y to confirm.

Summary of Contents for DS300f


































































































































































































































































































































































































































































Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands

Asus DS300f, User Manual

Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands