manualshive.com logo in svg

Asus DS300f, User Manual

Share
Download
Asus DS300f User Manual Download Page 194

17
5 

Chapter 4: Management with ASUS Storage Management 

 

 

 

Working with the Logical Drive Summary

 

 

The Logical Drive Summary displays a list of all logical drives in the ASUS 
Storage enclosure plus the expanded or cascaded enclosures. This list does not 
arrange the logical drives under the disk array to which they belong nor under the 
enclosure in which they are located. 

 

Logical Drive Summary includes the following functions: 
• 

Viewing a List of All Logical Drives (page 175) 

• 

Viewing Individual Logical Drive Information (page 175) 

• 

Creating a LUN Clone (page 175) 

 

Viewing a List of All Logical Drives

 

 

To view a list of all logical drives in all enclosures: 

 

1.  Click the Subsystem 

 

icon in Tree View. 

 

2.  Click the Drive Summary 

 

icon. 

 

Viewing Individual Logical Drive Information

 

 

1.  Click the Subsystem 

 

icon in Tree View. 

 

2.  Click the Drive Summary 

 

icon. 

3.  Click the Logical Drive 

 

icon. 

The information and location for the logical drive appear in Management 
View. See Viewing Logical Drive Information (page 164). 

 

Creating a LUN Clone

 

 

A LUN clone is an exact copy of the original LUN or logical drive, including all the 
data it contains, at one point in time. Use a LUN clone as a backup or to migrate 
a LUN from one system to another. 

 

Important

 

 

The action of creating a LUN momentarily takes the original LUN 
or logical drive offline, meaning nobody can read or write to it. 

 

A LUN clone has the same capacity, stripe size, read and write policies as the 
orignal LUN. However, the LUN clone can be a different RAID level. The choice 
of RAID levels depends on the disk array. And if you have multiple disk arrays, 
you can create the LUN clone on a different disk array than the original LUN. 

 

You can create a LUN clone immediately using this procedure, or schedule LUN 
cloning to run automatically at another time. 

Summary of Contents for DS300f


































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands