Asus DS300f User Manual Download Page 255

Page: 255 / 449

236

Chapter 6: Management with the CLU

Managing Spare Drives

Spare Drive Management includes the following functions:
•

Viewing a list of Spare Drives (page 236)

•

Creating a Spare Drive (page 236)

•

Making Spare Drive Settings (page 237)

•

Running Spare Check (page 237)

•

Deleting a Spare Drive (page 238)

Viewing a list of Spare Drives

To view a list of spare drives:

From the Main Menu, highlight

Spare Drive Management

and press Enter.

A list of the current spare drives appears, including the following parameters:

•

ID number

•

Operational Status

•

Physical Drive ID number

•

Configured Capacity

•

Revertible

– The spare drive returns to spare status after you replace

the failed drive in the disk array

. See ―Transition‖ on page 352 for more

information.

•

Type

– Global (all disk arrays) or Dedicated (to specified disk arrays)

•

Dedicated to Array

– The array to which a dedicated spare is assigned

Creating a Spare Drive

Only unconfigured physical drives can be used to make spares. Check your
available drives under Physical Drive Management. See

―Managing Physical

Drives‖ on page 222.

1. From the Main Menu, highlight

Spare Drive Management

and press Enter.

2. Highlight

Create New Spare Drive

and press Enter.

3. Highlight

Physical Drive Number

and press the backspace key to erase the

current value, then type the new value.

Specify the number of the physical drive you want for your spare. The
available drive numbers are in parentheses.

4. Highlight

Revertible

and press the spacebar to toggle between

Yes

and

A revertible drive can be returned to spare status after you replace the failed
drive in a disk array.

See ―Transition‖ on page 352 for more information.

Summary of Contents for DS300f


































































































































































































































































































































































































































































Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands

Asus DS300f, User Manual

Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands