Asus DS300f User Manual Download Page 154

Page: 154 / 449

13
5

Chapter 4: Management with ASUS Storage Management

Managing Enclosures

On ASUS Storage, enclosures include the main ASUS Storage subsystem or

Head Unit

as well as ASUS DS300j units that are connected through expansion.

Enclosure Management includes the following functions:
•

Viewing the Enclosure Information (page 135)

•

Locating an Enclosure (page 135)

•

Viewing Enclosure Topology (page 136)

•

Viewing Enclosure Information (page 136)

•

Making Enclosure Settings (page 137)

•

Viewing FRU VPD Information (page 137)

•

Checking the Battery (page 138)

•

Reconditioning a Battery (page 139)

•

Making Buzzer Settings (page 139)

Viewing the Enclosure Information

The enclosure information shown varies among different hardware versions.

To view information about the enclosures:

1. Click the Subsystem

icon in Tree View.

2. Click the Enclosures

icon.

The following information is shown:

•

Enclosure ID number

•

Enclosure Type

•

Operational Status

•

Status Description (specific components in need of attention, if any)

Locating an Enclosure

To locate an enclosure (subsystem):

1. Click the Subsystem

icon in Tree View.

2. Click the Enclosures

icon.

3. Click the

Locate Enclosure

button.

The disk status LEDs and the LEDs on the back of the enclosure blink for
one minute. See the Figures below.

Summary of Contents for DS300f


































































































































































































































































































































































































































































Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands

Asus DS300f, User Manual

Search results

Summary of Contents for DS300f

Reviews:

Brands by name

Popular brands