Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-91
25
R2_outgoing
Manage_Timer
14
01-50
To wait the first incoming digit after CO ring is
incoming, assign this timer (Only for ARIA-162)
26
R2_Pulse_Timer
07
01-30
(20msec)
To make end of pulse signal, define the signal length.
(Only for ARIA-162)
27
DT_Delay_Timer
20
01-30
(20msec)
To use for PP signaling
(Only for ARIA-162)
28
(25)
ACNR Retry Time
Count
1
1-9
(5sec)
1 means 5 seconds, ARIA will wait this value to
decide NO TONE.
3 means 15 seconds. (Only for CIS)
29
(26)
Switching Pause
Timer
0
00-40
(100ms)
This is used in sending DTMF tone when switching
on ISDN line.
30
(27)
OVR 1
st
CO GRP
1
0 - 1
When dialing „9‟/„0‟ and there is no idle CO line in
the 1
st
CO group, then it determines if it should
override to the next CO group or not.
(Default : UK/KOR = 0, other countries = 1)
31
R2 Incoming
Manage Timer
14
01-50
Reserved for R2-DCOB signal. (Only for ARIA-
162)
32
R2 Disappear Timer
14
01-50
Reserved for R2-DCOB signal (Only for ARIA-162)
33
(28)
CO Call Drop Timer
10
01-99
Outgoing CO call time is allowed for this time.
*. The number in ( ) is for ARIA-100/FPII.
TABLE 5.4.1 Button Configuration for System Timers - I (PGM 43)
5.5 SYSTEM TIMERS - II (PGM 44)
PROCEDURE
SYSTEM TIMER 2
PRESS FLEX KEY (1-24)
(1)
[TRANS/PGM]
+ 44.
(2) To program, use the BTNs as Table 5.5.1. Press one of BTN 1-
24, and enter related data. (LED of selected Flex button will be lit.)
SYSTEM TIMER 2
PRESS FLEX KEY (1-24)
(3) Press
the
[HOLD/SAVE]
button for updating database
permanently.
SYSTEM TIMER 2
PRESS FLEX KEY (1-24)
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) without updating system memory.