Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-108
5.16 DID DIGITS CONVERSION (PGM 55)
With Direct Inward Dialing (DID), a user dials through a public telephone network. To complete the
connection, the DID trunk receives two, three or four digits from the central office, and routes the call
to the proper corresponding station. The DID dialed digits may be modified by stripping up to two
leading digits, by substitution of two leading digits (after stripping).
Note that there is no analog DID line board in ARIA-100.
PROCEDURE
DID DIGIT CONVERSION
RCV#:3 CONV:#*** 2ND_CNV
(1)
[TRANS/PGM]
+ 55. LCD shows current status of DID Digit
Conversion.
1 2 3 4 5 6 7 8 9 0
(1 2 3 4 5 6 7 8 9 0)
(2) To program, use the Flex. Buttons of Table 5.16.1.
To assign received digit number from PBX, press BTN 1 and
enter data, then entered data will be displayed on LCD.
To assign converted DID 4 digits, press BTN 2 and dial 4 digits
(combination of 0-9, *, #), then entered 4 digits will be displayed
on the LCD.
To assign DID 2nd digit conversion table, press BTN 3 and
enter 10 digits (Ex: 1 2 3 4 5 6 7 8 9 0).
ENTER PROGRAM CODE
(3) Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
BTN
ITEM
DEFAULT
RANGE
REMARK
1
DID Received Digit No. from PX
3
2 - 4
2
DID Digit Conversion
#***
4 digits
(d
, *, #)
d
: digit (0 - 9)
# : ignore digits
* : bypass
3
DID 2nd Digit Conversion
(1 2 3 4 5 6 7 8 9 0)
TABLE 5.16.1 Button Configuration for DID Digit Conversion (PGM 55)