Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-50
3.2 STATION ATTRIBUTE - II (PGM 11)
PROCEDURE
STATION ATT 2
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 11.
100-110 QUE WTONE OVRD
AHLD DSEC MON SPK HOWL
(2) Enter station range (Ex. 100-110). Initially LED shows
associated item's status of the first station in range.
(3) To program, use the BTN as Table 3.2.1. Press BTN 1-8 for
toggle setting,
yes (LED on)/no (LED off)
. (LEDs of BTN (1-8)
related to each feature mean current status)
STATION ATT 2
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION ATT 2
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to initial admin state with no updating system
memory.
BTN
ITEM
DEFAULT (LED)
REMARK
1
CO Line
Queuing
YES (ON)
The allowance of queuing for a busy CO/group of lines.
2
3-min
Warning Tone
NO (OFF)
The allowance to receive warning tone in order to remind the call elapse
time in case of outgoing CO conversation.
3
Override
Privilege
NO (OFF)
The allowance to override CO line to gain access to the conversation.
4
Auto CO
Line Hold
YES/ATD (ON)
NO/Others (OFF)
The allowance to place the previous CO calls on hold automatically
when selecting another CO line.
5
Data Line
Security
NO (OFF)
The allowance to protect from override and camp-on, when busy state.
If an analog extension (Data, Fax, Modem), which is assigned to data
line security, makes an external call via ISDN line, 3.1KHz Setup message
will be sent to ISDN CO line instead of speech Setup message.
6
Group
Listening
NO (OFF)
The allowance to use group listening (While you are talking on handset,
by pressing the [MON] button, other people around you may hear the
conversation through the speaker of the key telephone).
7
Speakerpho
ne/ Headset
Speakerphone
(ON)
Headset operation or Speakerphone operation
8
Howling
Tone to SLT
YES (ON)
The allowance to give howling tone to SLT
9
DID Call
Waiting
No (OFF)
The allowance to give DID ring to station when it is busy.
TABLE 3.2.1 Button Configuration (PGM 11)