Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-81
4.9 CO LINE ATTRIBUTE
– IV (PGM 38)
PROCEDURE
CO LINE ATT 4
ENTER CO RANGE
(1)
[TRANS/PGM]
+ 38.
CO LINE ATTRIBUTES 4
PRESS FLEX KEY (1-8)
(2) Enter CO line range (Ex. 01-05). LCD prompts to press Flex.
BTN (1-8).
01-05 : CO RING TYPE
RING: 0
(3) To program the CO Line ring type, press BTN 1 and dial ring
type 1-4. By default ring type is not assigned (0).
To program the CO Line MOH, press BTN 2 and enter MOH
number (0) then entered data will be displayed on LCD. (MOH
0
– MOH 9)
To program the DTONE, press the 3
rd
button. And press 0 or 1.
01-05 : RING BACK CAUSE
HANDLING: DISABLE
(3)(4)
To provide tone (Busy/Error/Ring Back/Announce) in R2/ISDN
PX which does not give tone, press Flexible BTN 4~7. It
determines tone type. (Ex. When the Cause is ring back)
01-05 : ERR CAUSE
HANDLING: DISABLE
(3)(5)
Ex. When the Cause is error, press Flex. BTN 5.
01-05 : BUSY CAUSE
HANDLING: DISABLE
(3)(6)
Ex. When the Cause is busy, press Flex. BTN 6.
01-05 : ANNC CAUSE
HANDLING: DISABLE
(3)(7)
Ex. When the Cause us announcement, press Flex. BTN 7.
01-05 : CO PAGE ENABLE
ON (1)/OFF(0): 1
(3)(8)
To enable/disable CO page, press Flex. BTN 8.
CO LINE ATT 4
ENTER CO RANGE
(4)(9)
Press the
[HOLD/SAVE]
button for updating database
permanently.
CO LINE ATT 4
ENTER CO RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory. Enter new PGM number for programming
another parameters.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering