Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-83
4.10 R2 DCOB CO LINE ATTRIBUTE (PGM 39)
PROCEDURE
CO LINE ATT FOR R2
ENTER CO RANGE
(1)
[TRANS/PGM]
+ 39.
01-30 IN_S OUT_S B_SIG
GRP-II
(2) Enter CO line range to setting signal type. (Ex. Dial 01 and 30)
INCOMING SIG : DTMF
Press flexible button (1-4). (Ex. Press BTN 1.)
OUTGOING SIG : DTMF
Press flexible button (1-4). (Ex. Press BTN 2.)
B SIG : CHARGE
Press flexible button (1-4). (Ex. Press BTN 3.)
It means ANI service will be activated.
GRP-II SIG : GRPII-1
Press flexible button (1-4) (Ex. Press BTN 4.)
INCOMING SIG : R2MFC
(4) (3)
Dial digit for setting signal type.(0-2).[0: PULSE, 1: DTMF,
2 : R2MFC]
(Ex. When incoming signal is programmed, dial 2.)
In case of pressing Flex. BTN
1 or 2, then can be dialed “0”
from “2”
B SIG : MALICE
Dial digit for setting signal type (0-9). [7: FREE, 6: CHARGE,
1: MALICE, ETC: OPTION]
(Ex. In case of pressing Flex. BTN 3, then dial
“1”.)
INCOMING SIG : R2MFC
(5)(4)
Press
the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering