Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-57
3.7 ICM TENANCY GROUP (PGM 16)
A station may belong to only one ICM tenancy group or none at all. A station in ICM tenancy group (A)
can call other stations in other ICM tenancy group (B) if the ICM tenancy group (A) is programmed to
be allowed to access ICM tenancy group (B).
In ARIA-100/ARIA-FPII, system supports only 5 ICM tenancy Groups and tenancy ATDs. In ARIA-162,
system supports 10 ICM tenancy groups and tenancy ATDs.
PROCEDURE
ICM TENANCY GROUP
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 16.
100-110 IGRP01
GATD.... ACEGRP
(2) Enter station range (Ex. 100-110). LCD shows current status of
the first station in range.
(3) To program ICM Tenancy Group, use the buttons as Table
3.7.1.
To assign ICM tenancy group to the stations, press BTN 1 and enter
Group No., then assigned group number will be displayed on LCD.
100-110 IGRP01
GATD100 ACEGRP
To assign Attendant station of the ICM tenancy group, press
BTN 2 and enter the station number (ex. 100), then assigned
attendant station number will be displayed on LCD.
100-110 IGRP01
ENTER ACCESS GROUP 1-xx
To assign accessible ICM tenancy groups for the group, press
BTN 3. Then the LCD will appear like this, and LEDs of BTNs
show current accessible ICM tenancy groups. To change ICM
tenancy groups access, press BTN for toggle setting. (LED ON:
stations have the authority to access the ICM tenancy group.
LED OFF: stations have not the authority to access the ICM
tenancy group.). Pressing [
] button, will goes to step (2)
without updating database.
ICM TENANCY GROUP
ENTER STA RANGE
(7)(4)
Press the
[HOLD/SAVE]
button for updating database
permanently.
ICM TENANCY GROUP
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
Formatted: Bullets and Numbering