Aria Aria-100 Programming Manual Download Page 131

Page: 131 / 163

Programming Manual for Digital Key Telephone System

GDK-162/100/34e

Admin Programming

99A Software 1/6/00

A-126

5.34 RING FREQUENCY (PGM 75)

Frequency for 4 differential rings may be changed to the closest ring frequency that provides. It is

provided for only digital keyset and it is assigned at PGM 38-BTN 1.

PROCEDURE

RING FREQUENCY

RNG1 RNG2 RNG3 RNG4

(1)

[TRANS/PGM]

+ 75.

RING FREQUENCY

T1:1000 T2:1020 (0:NONE)

(2) To change ring frequency of called party, press BTN 1-4 and

dial 1 (T1) or 2 (T2) and dial 4 digits of new frequency (Ex.

Press BTN 1 to change for new ring 1 frequency).

ENTER PROGRAM CODE

(6)(3)

Press the

[HOLD/SAVE]

button for updating database

permanently.

ENTER PROGRAM CODE



Press [



] button instead of the

[HOLD/SAVE]

button, then

system goes to

PGM number enter

mode

without updating

system memory.

BTN

ITEM

RANGE

DEFAULT

REMARK

Ring 1 Frequency

0000 - 9999

T1: 1000 T2: 1020

Ring 2 Frequency

0000 - 9999

T1: 0890 T2: 0910

Ring 3 Frequency

0000 - 9999

T1: 1260 T2: 1280

Ring 4 Frequency

0000 - 9999

T1: 0800 T2: 0820

TABLE 5.34.1 Button Configuration for Ring Frequency (PGM 75)

Formatted: Bullets and Numbering

Summary of Contents for Aria-100




































































































































































Search results

Summary of Contents for Aria-100

Reviews:

Aria Aria-100, Programming Manual, Page: 131 / 163

Search results

Summary of Contents for Aria-100

Reviews: