Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-60
3.10 HOT LINE / WARM LINE (PGM 19)
This feature lets a station perform a pre-assigned feature as soon as lifting handset or pressing the
[MON]
button as if a station selects the feature (Hot Line). On the other hand, Idle Line Selection for a
station which is assigned to warm line, is activated when takes no action for Warm Line Timer after
lifting handset or pressing the
[MON]
button (Warm Line). Warm line is programmable at PGM 10-BTN
7.
All stations are not assigned any Idle Line Selection by default.
PROCEDURE
IDLE LINE SELECTION
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 19.
100-110 IDLE LINE
KEY.. CO.. COG.. STA....
(2) Enter station range (Ex.100-110). LCD and LEDs of BTN 1-4
show idle line selection of the first station in range.
(3) To program Idle Line Selection, use the BTN as Table 3.10.1.
To assign Idle Line Selection, press one of BTN 1-4 and enter
related data. Then selected BTN's LED will be lit and the
related data will be displayed on LCD. Otherwise, to delete any
Idle Line Selection, press the lighting button and the
[SPEED]
button, then Idle Line Selection assignment will be deleted. SLT
can't select key assign for Idle Line Selection.
IDLE LINE SELECTION
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
IDLE LINE SELECTION
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
BTN
ITEM
RANGE
REMARK
ARIA-FP
II
ARIA-100 ARIA-162
1
Flex. BTN
01 - 24
To activate a feature on a flex button as if pressed
2
CO Line
01 - 34
01 - 48
01 - 96 To seize a CO Line
3
CO Group
01 - 10
01 - 24
01 - 48
To seize a CO Line Group
4
Station
100-167
100-171
100-291 To call an another station
TABLE 3.10.1 Button Configuration for Hot Line/Warm Line (PGM 19)