Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-31
000 001 002 003
100 101 102 103
(3) Station Numbers Assign. Press BTN 1 in the first 24 flexible
number programming mode, then you will see the 4 station
numbers corresponding to the 4 port numbers. Station number
length is in the range of 1 digit through 4 digits. There are two
methods for changing station number.
Dial two station numbers - Range start station number & range
end station number, then LEDs of associated Flex. buttons with
station are steady on. Press the
[SPEED]
button, station
numbers changed from the first station number on current LCD
to range end (All LEDs of BTN are off.).
Press one of BTN 1-4 (Each BTN 1-4 is assigned to station
number 1- 4 on the current LCD), then LED of pressed Flex
button is steady on. Dial new station number and press the
[SPEED]
button, or press the
[SPEED]
button to delete current
station number. (The LED of pressed Flex. button is off.).
If you want to delete all station numbers, press the
[SPEED]
button twice, then all station numbers are cleared.
If you want to change next 4 station numbers then press [
]
button. If you want to change previous 4 station numbers, then
press [
] button.
STA GRP PILOT NUMBER
START & END #(620-6xx)
Change with entering range (Ex. Pilot Group Assign). Each
code length is in 1~4 digits. Dial the first Station Group Pilot
Number and Last Station Group Pilot Number, and press
the
[SPEED]
button. Then you can see the changed Station Group
Pilot Numbers on the LCD. If you press [
] button, go to the
next Flexible number assign mode (in this case, SLT PGM
Mode Select).
SLT PGM MODE SELECT
ENTER NEW #(*3)
Change a number
(Ex. SLT PGM Mode select Number). Code
length is in the range of 1 digit through 4 digits. Dial SLT PGM
Mode Select Number, and press the
[SPEED]
button. Then you
can see the changed SLT PGM Mode Select Number on the
LCD. If you press [
] button, go to the next Flexible number
assign mode (Internal Page Zone Numbers Assign)
(4) If you want to save all changed Flexible numbers to system
memory, press the
[HOLD/SAVE]
button. There are no errors
in Flexible Numbers, then confirmation tone will be received.
But errors are detected, then error tone will be received with no
updating system memory.