Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-67
3.15 STATION ATTRIBUTE - VI (PGM 24)
PROCEDURE
STATION ATT 6
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 24.
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(2) Enter station range (Ex.100 - 110). LCD shows current status of
the first station in range. To program, use the Flex Buttons as
Table 3.15.1.
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(3) Press BTN 1 and dial 00~10. To use CO Name Display, PGM
74 should be programmed previously.
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(4) Press BTN 2 for toggle setting. YES (LED On)/NO (LED Off) to
program COLR.
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(5) Press BTN 3 for toggle setting, YES (LED On)/NO (LED Off) to
program the Headset Ring Mode.
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(6) Press BTN 4 for toggle setting, YES (LED On)/NO (LED Off) to
program COG (CO Group access using CO Access Code).
100-110 : CO NAME BIN 00
COLR HSR COG FAC
(7) Press BTN 5 for toggle setting, YES (LED On)/NO (LED Off) to
program the FAC (Sending Keypad Facility).
STATION ATT 6
ENTER STA RANGE
(8) Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION ATT 6
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.