Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-88
5.3 SYSTEM ATTRIBUTE - III (PGM 42)
PROCEDURE
SYS ATT3: EXTR RR CDIAL
SLTR D_DET A_CLR A_PRT
(1)
[TRANS/PGM]
+ 42. LEDs of BTN 1-7 show current status of
system Attributes-III.
(2) To program, use the BTNs as Table 5.3.1. Press BTN 1-7 for
toggle setting. (LEDs of BTN 1-7 related to each feature mean
current status)
ENTER PROGRAM CODE
(3) Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
BTN
ITEM
DEFAULT(LED)
RANGE
REMARK
1
External Night
Ring
NO (OFF)
YES/NO
When CO lines are marked to UNA, ring will be
sent to LBC1 when an incoming call occurs on
those lines during night service.
2
CO Line
Access in CO
Group
Last Choice (OFF)
Round Robin
/ Last Choice
The method of a CO line seizing on CO Line
Groups access.
3
Continuous
Dial-Tone
Continuous (ON)
Continuous /
Discontinuous
This field set whether ICM dial tone is continuous
or not.
4
SLT Ring
Cadence
NO (OFF)
YES/NO
Changes a cadence of ICM or incoming CO ring
of SLT. In case of NO,
ICM: 1sec on/ 4sec off
CO : 0.4s on/ 0.2s off/ 0.4s on/ 4sec off
In case of YES, a cadence is in reverse.
5
Dial Tone
Detection
NO (OFF)
YES/NO
When the speed dial is activated, system detects
dial tone using CPT instead of pause timer.
6
ACD Clear
NO (OFF)
YES/NO
Determines if initialize ACD database after print-
out.
7
ACD Printing
Base Timer
1 Hour (OFF)
10sec/1 Hour
Determines the unit timer of "ACD periodic print
timer" at PGM 44.
TABLE 5.3.1 Button Configuration for System Attribute - III (PGM 42)