Aria Aria-100, Programming Manual, Page: 106 / 163

Programming Manual for Digital Key Telephone System GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-101
5 Overflow
Destination
.... Sta/
Sta Group
The call to the group will continue to be reroute until reaching the
last station in the group where the call will remain or can be sent
to this overflow station/group.
6
7 Put Mail
Index
1 1 -4 This index is one of the voice mail dialing table (PGM 73)
8 Get Mail
Index
2 1 -4 This index is one of the voice mail dialing table (PGM 73)
9 Hunt Type 1 0 / 1 0: Terminal Hunt Group
1: Circular Hunt Group
TABLE 5.9.3 Button Configuration for Voice Mail Group Attribute (PGM 48)
BTN ITEM DEFAULT RANGE REMARK
1 Overflow
Timer
180 000 - 600
(3 Digits)
If this timer expires after a call comes in the group, the call is
routed to the overflow destination.
2 Overflow
Destination
….
Sta/
Sta Group
The call to the group will continue to be reroute until reaching the
last station in the group where the call will remain or can be sent
to this overflow station/group.
3 Music
Source
0 0 - 9 Music Source Channel No.
4 Ring Group
Annc. Timer
15 000-999 Determine the time that a call will be in the ring process before
receiving the announcements. If no ring group announcement is
assigned, the timer is ignored. If the timer is set to 0, the call will
receive the entire announcement prior to the ring process
(guaranteed announcement).
5 Ring Group
Annc.
Location
- DVU 1-9 Each ring group can be assigned to an announcement that is
played when the call is received at first. The announcement can
be assigned as DVU.
6 Service No
Duty
0/1 0: Disable
1: Enable
Disable: All calls are queuing to the group if there is no on-duty
station.
Enable: All calls are routed to attendant or ring assigned stations if
there is no on-duty station in the group.
If alternative destination is set, this feature will not be activated.
TABLE 5.9.4 Button Configuration for Ring Group Attribute (PGM 48)
BTN ITEM DEFAULT(LED) RANGE REMARK
1 Auto Pickup NO (OFF) YES/NO If a hunt member is ringing, another hunt member can pick up
the call automatically by just pressing [MON] or off-hook.
2 All Ring NO (OFF) YES/NO When a hunt member that is TONE mode is ringing, all the
other stations are ringing also.
TABLE 5.9.5 Button Configuration for Pick-up Group Attribute (PGM 48)