Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-95
2.
When assigning a station group to any type of hunt group or voice mail group, the system
initializes hunt attributes by default value for it's own function. It can be programmed to meet each
customer's individual need at PGM 48.
PROCEDURE
STATION GROUPS
ENTER GROUP # (620-634)
(1)
[TRANS/PGM]
+ 47.
STATION GROUP 620
CIR TERM UCD VM RNG PKUP
(2) Enter Station Group Number (Ex. 620). LEDs of BTN 1-6 (one
of 1-5 and 6) show current station group types.
GRP 620 CIRC/PKUP
.... .... .... ....
(3)
To assign a station group to
hunt group (Circular/Terminal/
UCD)
,
select one of Flex. Button 1-3 as hunting type.
To assign
a station group to
Voice Mail group
, press Flex. Button 4.
To
assign a station group to
Ring group
,
press Flex. Button 5.
To
assign a station group to
Pick-up group
, press Flex. Button 6.
Each of the system's groups is assigned to Call Pick-Up Group
and Hunt Group. LEDs 1-6 shows currently programmed
status. After setting station group type, press the
[SPEED]
button. (Ex. CIR & PKUP). If station member was already
assigned to the station group 620, then you will see the first 4
station numbers with input order.
(4)
To insert a new station as member of the station group
, press
the one of BTN 1-4 and enter the new station number.
To
delete a current station member,
press the flex button matching
that station number and press the
[SPEED]
button.
Note
:
If you want to change next 4 station members then press [
]
button.
STATION GROUP 620
CIR TERM UCD VM RNG PKUP
(5) Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION GROUP 620
CIR TERM UCD VM RNG PKUP
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (2) without updating system memory.