Aria Aria-100 Programming Manual Download Page 107

Page: 107 / 163

Programming Manual for Digital Key Telephone System

GDK-162/100/34e

Admin Programming

99A Software 1/6/00

A-102

5.10 EXECUTIVE / SECRETARY PAIRS (PGM 49)

There are a number of Executive/Secretary pairs available for assignment so that when the executive

designated station is in DND state, intercom calls and transfers will be automatically routed to the

designated secretary station.

By default, Executive/Secretary Pairs are not assigned at all.

In ARIA-

162, system supports 24, in ARIA-100, system supports 12, and in ARIA-FPII, system supports 6

Executive/Secretary pairs.

PROCEDURE

EXEC/SEC PAIRINGS

PRESS FLEX KEY (1-xx)

(1)

[TRANS/PGM]

+ 49.

EXEC/SEC PAIRINGS

..../.... PAIR 01

(2) Select the one of Exec/Sec pairs number. (Ex Pair 1: Flex

button 1).

EXEC/SEC PAIRINGS

101/105 PAIR 01

(3) To assign Exec/Sec pair, enter Executive station number and

Secretary station number, then Exec/Sec pair will be displayed

on LCD. (Ex. Exec/Sec:101/105). To delete Exec/Sec Pair

press the

[SPEED]

button.

EXEC/SEC PAIRINGS

PRESS FLEX KEY (1-xx)

(4) Press the

[HOLD/SAVE]

button for updating database

permanently.

EXEC/SEC PAIRINGS

PRESS FLEX KEY (1-xx)



Press [



] button instead of the

[HOLD/SAVE]

button, then

system goes to step (1) without updating system memory.

5.11 ALARM ATTRIBUTE (PGM 50)

PROCEDURE

ALARM ATTRIBUTES

ENAB ALRM CLOSE REPT

(1)

[TRANS/PGM]

+ 50. LEDs of BTN 1-4 show current status of

Alarm Attributes.

(2) To program, use the BTNs as Table 5.11.1. Press BTN 1-4 for

toggle setting (LEDs of BTN 1-4 related to each feature mean

current status).

Note

An SLT should not be assigned to receive signals for either

the alarm or door bell.

Summary of Contents for Aria-100




































































































































































Search results

Summary of Contents for Aria-100

Reviews:

Aria Aria-100, Programming Manual, Page: 107 / 163

Search results

Summary of Contents for Aria-100

Reviews: