Aria Aria-100, Programming Manual, Page: 87 / 163

Programming Manual for Digital Key Telephone System GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-82
BTN ITEM DEFAULT RANGE REMARK
1 Ring Type 0 (Not
assigned)
0
– 4
The CO can give its own ring type signal to the station in
system through this field. This ring type can be
programmed at PGM 75.
2 CO Line Base
MOH
0 (Not
assigned)
0
– 9
0: Not assigned by this field. (See PGM41
– BTN 2)
1: Channel 1 (External Music 1 or Internal Music, see
PGM41
– BTN 4)
2: Channel 2
3: Day (Channel 1) / Night (Channel 2)
4: DVU-17
5~9: SLT MOH
3 DIALT
(Dial Tone)
1(ON) ON/OFF ON: In case PX or PABX provides dial tone.
OFF: In case PX or PABX does not provide dial tone.
4 Cause
Ringback Signal
#
0 (Disable) 0 / 1 If PX which does not give you tone for called party status
exists, then the system provides tone according to cause
value (This field is only when Cause means that Ringback
is provided by PX.).
0: Disable, 1: Enable
5 Cause Error
Signal #
0 (Disable) 0 / 1 If PX which does not give you tone for called party status
exists, then the system provides tone according to cause
value (This field is only when Cause means that error tone
is provided by PX.).
0: Disable, 1: Enable
6 Cause Busy
Signal #
0 (Disable) 0 / 1 If PX which does not give you tone for called party status
exists, then the system provides tone according to cause
value (This field is only when Cause means that busy tone
is provided by PX.).
0: Disable, 1: Enable
7 Cause
Announcement
Signal #
0 (Disable) 0 / 1 If PX which does not give you tone for called party status
exists, then the system provides tone according to cause
value (This field is only when Cause means that
announcement is provided by PX, but the system provides
only error tone.).
0: Disable, 1: Enable
8 Enable/Disable
CO Page
0 (Disable) 0 / 1 0: Disable
– Cannot make a CO page
1: Enable
– Can make a CO page (External Page)
TABLE 4.9.1 Button Configuration for CO Attribute - 4 (PGM 38)