Aria Aria-100, Programming Manual, Page: 77 / 163

Programming Manual for Digital Key Telephone System GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-72
4. CO LINE PROGRAMMING
If CO line features are to be changed, press the [TRANS/PGM] button and dial 30-39 in Admin
Programming Mode. When programming, LCD and LEDs indicate current programmed data and
programming status. If the programmer enters correct data, the
n LCD and LED‟s show the entered
data and the data is stored in the temporary buffer area. To save the data permanently, press the
[HOLD/SAVE] button, then all data in the temporary buffer (same as LCD/LEDs show their status) are
stored into system memory.
4.1 CO LINE ATTRIBUTE
– I (PGM 30)
In this program mode, you can program the following items.
BTN ITEM REMARK
1 CO Group Groups should be assigned according to CO type and Class-Of-Service, etc.
ARIA-162

Group 00: Private Line (Only can accessed by the user having a direct {CO} button.)

Group 01-48

Group 49: Not available CO Line in any CO Line Group
ARIA-100

Group 00: Private Line (Only can accessed by the user having a direct {CO} button.)

Group 01-24

Group 25: Not available CO Line in any CO Line Group
ARIA-FPII

Group 00: Private Line (Only can accessed by the user having a direct {CO} button.)

Group 01-09

Group 10: Not available CO Line in any CO Line Group
2 CO COS There are 5 possible classes of service which a line may be assigned:

CO COS 1: no restriction

CO COS 2: Exception Table A governs; STA. COS 2 and 4 monitored.

CO COS 3: Exception Table B governs; STA. COS 3 and 4 monitored.

CO COS 4: restricts Long Distance Code as the first digit, 8 digits limitation.

CO COS 5: overrides STA. COS 2,3,4 and 5, 6.
For a particular call, the CO COS is combined restriction for the particular call. (Refer to
TABLE 3.5.2). (All lines are assigned as CO Line COS 1 by default.)
3 CO Group
Enter
When accessed a CO line, you should enter authorization code if this flag is set to YES.
(All lines are assigned to No authorization code enter when access a CO Line by
default.)
4 DISA-xx Each CO line in the system can be programmed as DISA (Direct Inward System Access)
line and the DISA types are as follows;

0 (No DISA:U)/1 (Night Only: N)/2 (Day & Night: B)/3 (Special: S) * /4 (Day Only: D)

0 (Dial-Tone) / 1-9 (DVU Announce 1-9)
5 DISA
Account
Enter
When accessed another CO line in the system by DISA line, you should enter
authorization code if this flag is set. (All lines are assigned to No authorization code enter
when accessing a DISA Line by default.)
See also PGM 43-BTN 23 for CO/Tie line COS when using DISA.