Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-51
3.3 STATION ATTRIBUTE - III (PGM 12)
PROCEDURE
STATION ATT 3
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 12.
100-110 ALM IBOX COL
NTA DVU VOVR DMRX PCALL
(2) Enter station range (Ex. 100-110). Initially LED shows
associated item's status of start station in range.
(3) To program, use the Flex buttons as Table 3.3.1. Press Flex
BTN 1-8 for toggle setting,
yes (LED on)/no (LED off)
. (LEDs of
Flex button(1-8) related to each feature mean current status)
STATION ATT 3
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION ATT 3
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
BTN
ITEM
DEFAULT(LED)
REMARK
1
Alarm / Door Bell
YES (ON)
The allowance to receive Alarm/Door Bell signal.
2
ICM Box Signaling
YES (ON)
The allowance to receive ICM box signal.
3
CO Line .Access
YES (ON)
The allowance to access individual CO line by dialing.
4
No Touch Answer
YES (ON)
OFF
The allowance to connect the transferred CO line automatically.
5
DVU Access
NO (OFF)
The allowance to access Digital Voice Unit (DVU/EDVU)
6
Voice Over
NO (OFF)
The allowance to use Voice Over feature
7
Data Module RX
NO (OFF)
The allowance to allow Data Module RX
8
Prepaid Call
NO (OFF)
The allowance to use Prepaid CO Call feature.
TABLE 3.3.1 Button Configuration - III (PGM 12)