Aria Aria-100, Programming Manual, Page: 102 / 163

Programming Manual for Digital Key Telephone System GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-97
UCD 620
PRESS FLEX KEY (1-15)

To program, use the BTNs as Table 5.9.2. (Ex. Group 620 is
UCD hunt )
①
To program timers and count: After pressing the one of BTN
1-7 and BTN 16, enter the timer value within data range
matching digit number.
②
To program overflow destination/supervisor/alternate
destination, press Flex. Button 8/13/14 and do one of:

Enter station number,

Enter hunt group number,

Press the [SPEED] button for deleting.
⑤③
To program to announce location 1/2, press BTN 9/10 and do
one of:

Dial '1' and enter station number,

Dial '2' for assigning to DVU,

Press the [SPEED] button for deleting.
⑥④
For repeating to the announce location 2, press BTN 11 and
dial 1(Yes).
⑤
To enable
“Service No Duty”, press BTN 17 and dial 1 (Yes).
101 102 103 104 105
0 0 0 0 0
⑤⑥
To assign UCD Hunt Stations' priority, press BTN 12. If
station members 101-110 was already assigned to the UCD
hunt group 620, then you will see the first 5 station numbers
and its' priorities. Press the one of BTN 1-5 and dial the
priority value (0-9). The updated priority value will be
displayed on LCD. If you want to change next 5 station
members' priorities, then press [

] button.
⑥⑦
To assign the music source number, press BTN 15 and dial
music source number (0-2).
VM 620
PRESS FLEX KEY (1-9)

To program, use the Flex Buttons as Table 5.9.3. (Ex. Group
620 is Voice Mail group ). Program methods are the same as
the circular hunt. And to assign the put/get mail index, press
BTN 7 or 8 and enter the index (1-4).

To enable
“Service No Duty”, press BTN 17 and dial 1 (Yes).
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering