Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-138
6.2 CANNED TOLL TABLES (PGM 64)
In addition to the basic toll restrictions, stations with a COS 5 or 6 are subject to dial restrictions based
on the
“Canned” Allow and Deny tables. This program permits entries in the Canned Toll Tables. Both
the Allow and Deny Table have 10 bins, each up to 8 digits.
PROCEDURE
CANNED TOLL TABLES
PRESS FLEX KEY 1-2
(1)
[TRANS/PGM]
+ 64.
(2) To program Canned Toll Tables, use the BTNs as TABLE 6.2.1.
ALLOW TABLE
ENTER BIN NO 01-10
(3) Press a Flex. Button to program a table. Press BTN 1: Allow
Tables or press BTN 2: Deny Tables.
ALLOW TABLE
BIN 01 : E
(4) Dial Bin number:
(01-10 for Allow Table / 01-10 for Deny
Table).
Refer to Table 6.2.2 and enter data. Each entry can be
up to 8 digits. Press the
[SPEED]
button, and the LCD display
wi
ll be now updated. „E‟ means end of data entry.
To delete table entry, press the
[SPEED]
button without
entering any data.
ENTER PROGRAM CODE
(9)(5)
Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
BTN
ITEM
DEFAULT
ENTRY
REMARK
1
ALLOW
-
01 - 10
COS 5
2
DENY
-
01 - 10
COS 6
TABLE 6.2.1 Button Configuration for Canned Toll Table (PGM 64)
VALID DATA
FUNCTION
LCD DISPLAY
0 - 9, *, #
NUMBER
as dialed
[DND/FWD]
Don‟t Care
'D'
[SPEED]
End Of Data
'E'
TABLE 6.2.2 Data Entry of Canned Toll Table (PGM 64)
Formatted: Bullets and Numbering