Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-78
OPEN LOOP DETECT
ENTER CO RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
OPEN LOOP DETECT
ENTER CO RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
4.6 TIE LINE ASSIGNMENT (PGM 35)
It provides private two-way communication link between your system and other systems. Incoming TIE
trunk calls are directed to the attendant, a station, or a CO trunk. Outgoing calls on a TIE trunk are
accessed by CO Access code (801
– 8xx , 88XX) or TIE Routing code (89).
PROCEDURE
CO/TIE LINE ASSIGN
ENTER CO RANGE
(1)
[TRANS/PGM]
+ 35.
COLINE ASSIGN
NM RD LD EMC POL EMD DID
(2) Enter CO line range (Ex. 01-05). One of LED 1-7 lights on
current status of TIE ID. (See Table 4.6.1)
(3) Enter TIE Line ID using BTN 1-7, then the LED indicates
current status.
CO/TIE LINE ASSIGN
ENTER CO RANGE
(4) Press
the
[HOLD/SAVE]
button for updating database
permanently.
CO/TIE LINE ASSIGN
ENTER CO RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
BTN
ITEM
REMARK
1
2
3
4
5
6
7
Normal Ring (Default)
Ring/Down
Loop/Dial
Ear/Mouth Continuous
Polarity Reverse
Ear/Mouth Discontinuous
DID
One of these 7 types per one CO/Tie line is
assignable.
TABLE 4.6.1 Button Configuration for TIE Line (PGM 35)