Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-85
5. SYSTEM DATA PROGRAMMING
If system parameters are to be changed, press the
[TRANS/PGM]
button and dial 40-78. When
programming, LCD and LEDs indicate current programmed data and programming status. The
programmer enters correct data, then LCD and LEDs show the entered data and the data is stored in
the temporary buffer area.
After all, press the
[HOLD/SAVE]
button, all data in the temporary buffer
(same as LCD/LEDs show their status) are stored into permanent system memory.
5.1 SYSTEM ATTRIBUTE - I (PGM 40)
PROCEDURE
SYS ATT1: SHLD PRIV PWRN
PAGE OFFR MCNF SPDZ AQRB
(1)
[TRANS/PGM]
+ 40. LEDs of BTN 1-8 show current status of
System Attributes - I.
(2) To program, use the BTNs as Table 5.1.1. Press BTN 1-8 for
toggle setting (LEDs of BTN (1-8) related to each feature mean
current status)
ENTER PROGRAM CODE
(3) Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory. Enter new PGM number for programming
another parameters.
BTN
ITEM
DEFAULT
RANGE
REMARK
1
Hold
Preference
System
(ON)
System/
Exclusive
If system hold is preferred, depress
[HOLD/SAVE]
button
and twice for exclusive hold.
2
Auto Privacy
YES (ON)
YES / NO
The system can be programmed to override CO line call
to gain access to the conversation. If privacy is disabled,
a station privileged to override in PGM 11 joins an
existing call in progress.
3
Privacy
Warning Tone
YES (ON)
YES / NO
If desired, privacy warning tone can be suppressed.
4
Page Warning
Tone
YES (ON)
YES / NO
If desired, page warning tone can be suppressed.
5
Off-Hook Ring
Type
Mute (ON)
Mute/
One Burst
The system can be programmed for off-hook ring type to
be mute after one burst of ring, or ring.
6
Multi-Line
Conference
YES (ON)
YES/NO
The system allows a conference with multi-CO lines.