Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-62
3.12 STATION ATTRIBUTE - IV (PGM 21)
PROCEDURE
STATION ATT 4
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 21.
100-110 DIDR ACD_TN
COPGM ADM UCD RING0 CCDT
(2) Enter station range (Ex.100 - 110). LCD shows current status of
the first station in range.
(3) To program, use the Flex Buttons as Table 3.12.1. Press BTN
1-5, 7 for toggle setting,
yes (LED on)/no (LED off), except BTN
6
. To program the station's own ring type, press BTN 6 and dial
ring type 1-4. By default ring type is not assigned to (0).
STATION ATT 4
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION ATT 4
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
BTN
ITEM
DEFAULT(LED)
REMARK
1
DID Ring
YES (ON)
The allowance that the station call through DID line is presented at
station. If this field is set to No, the call is transferred to attendant.
2
ACD Warning
Tone
YES (ON)
Determines that the ACD supervisor monitors an agent with warning
tone or without warning tone.
3
CO PGM
NO (OFF)
Yes
Determines that each station user can program CO button or not.
4
ADMIN
NO (OFF)
Yes
The allowance the station to program Admin Database. This feature
is available at only DKTU.
5
UCD_ON
NO (OFF)
If this flag is set to Yes, system may get a hunt group number whom
a called one is belonging to and convert it to a hunt group call as if an
external party dials a hunt group number.
6
Ring Type
0 (0 - 4)
The station can give own ring type signal to other stations in system
through this field (calling party based). This ring type can be
programmed at PGM 76.
7
CO Call Drop
Timer Enable
NO (OFF)
If this flag is set to YES, station's outgoing CO call may be
disconnected when CO call drop timer (PGM 43-BTN 33: ARIA-162,
BTN 28: ARIA-100/FPII) is expired.
TABLE 3.12.1 Button Configuration for Station Attribute - IV (PGM 21)