Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-70
3.17 FLEX BUTTON ASSIGNMENT (PGM 29)
Each Flex. Button of key station can be assigned identified as one of the followings.
No.
Type
RANGE
REMARK
FP II
100
162
1
User Button
-
User can program by button programming procedure.
2
{CO xx} Button
01
– 34 01 – 48 01 – 96 CO Line
3
{CO Grp xx}
01
– 09 01 – 24 01 – 48 CO Group
4
{LOOP}
-
5
{STAxxxx}
100
–
133
100
–
171
100-291 Station No.
6
Sta PGM Button
Station Programming Code
7
{SPDxxx}
00
–19 /
200-399
00
–19 /
200-399
00
– 19/
200-999
Speed Bin
TABLE 3.17.1 Button Type for Flexible Button Assignment (PGM 29)
PROCEDURE
FLEX BUTTONS
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 29.
(KEY 01-24)
PRESS FLEX KEY
(2) Enter station range (Ex.100
–110).
(KEY 25-48)
PRESS FLEX KEY
In this status, if you press [
] button, then you go to the BTN
25-48 programming mode.
(KEY 01-24)
BUTTON 01 = CO 01
(5)(3)
To program Flex. Button, press the BTN which you want to
program (Ex. BTN 1). The LCD will display current BTN
assignment of the first station in range, and LED of the BTN (ex
BTN 1) will be lit. (See Table 3.13.3). Enter data, then entered
data will be displayed on LCD. (See Table 3.13.3)
FLEX BUTTONS
ENTER STA RANGE
(6)(4)
Press the
[HOLD/SAVE]
button for updating database
permanently.
FLEX BUTTONS
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering