Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-40
2.7 NEW LCR (PGM 07)
Dialed digits are checked for a match with entries in the 'Leading Digit Table' (LDT). If a match is found
then digits can be deleted or added according to entries in the 'Digit Modification Table' (DMT).
Different DMT entries can be used according to time of day and day of week.
PROCEDURE
LCR F1:M00 F2:DAY F3:TOD
F4:LDT F5:DMT F6:DB_INIT
(1)
[TRANS/PGM]
+ 07.
LCR F1:M01 F2:DAY F3:TOD
F4:LDT F5:DMT F6:DB_INIT
(2) F1: Change LCR access mode
Whenever pressing [F1], the LCD will be changed as
“M00”
“M01”
“M02”
“M11”
“M12”
“M13”
“M00” (toggle).
Press the
[HOLD/SAVE]
button to save the changed data.
DAY_ZONE 1:1234567 2: 3:
M1 TU2 W3 TH4 F5 SA6 SU7
(3) F2: Set the day-of-week zone (3 zones)
To set the day zone, dial the associated number as weekday
following the Flex BTN. (BTN 1 for zone 1, BTN 2 for zone 2,
BTN 3 for zone 3)
For example, if you want to set Saturday as zone 2, then BTN
2 and 6 and press the
[SPEED]
button or the
[HOLD/SAVE]
button.
LCD will be changed as
“ DAY_ZONE 1:123457 2:6 3: “.
TIME_ZONE(1-3)
TOD1 TOD2 TOD3
(4) F3: Set the time-of-day zone (3 zones)
To enter each time zone, press Flex BTN (1 for TOD1, 2 for
TOD2, 3 for TOD3).
TOD1 (24HOUR FORM)
1:08-18 2:18-24 3:00-08
(5) To enter value, dial the time range following the Flex BTN. (1
for zone 1, 2 for zone 2, 3 for zone 3)
For example, if you want to set time zone as Zone 1: 08-18
Zone 2: 18-24 Zone 3: 24-08, then, dial BTN 1, 0818 BTN 2,
1824 BTN 3, 24-08
LCD will be changed as
“1:08-18 2:18-24 3:00-08“.